Power source for welding thin steel sheets

Bild DW300+

New AC / MIG power source DW300 + at the start!

The new pulse inverter
power source
DW300 + now will replace the DW300 welding power source, which already was used successfully for years for thin sheet metal in aluminum. Like its predecessor, the new DW300 + represents  the well known AC / MIG technology, a method developed by OTC, which is classified as particularly gentle for the material. In addition to thin aluminum sheets the DW300 + can be used with even thin steel sheets.


>> Let us inform you personally

World first: robot controller controls wire drive

 

 

 

 

With the AC servo torch system OTC provides a wire in the torch, which can be directly controlled by the robot controller. The AC servo torch is virtually synonymous with an autonomous robot axis, and has response times in milliseconds. The AC servo torch can be used with any OTC inverter welding machine. The system is specifically tailored to the D-series of OTC power sources. By the way the new burner system will particularly benefit in the thin sheet metal aluminum and steel sector.

 

>> more about the AC servo torch

Expanded range of Servo Motors

HWP.jpgPowerful servomotors accompany new A2 Robot Series

In order to fit a 6 - or 10-ton-positioner of OTC and manage fast enough, OTC now has a servo motor series of 7 kW. With the replacement of the AX series and the introduction of the new robot series A2 to the engine power was increased by 2.5 KW. As a result, higher speeds, with much higher loads can be achieved. As a result, higher speeds, with much higher loads can be achieved.
>> You like to know more about the servomotores of OTC? Ask us.... 

Imprint

OTC DAIHEN EUROPE Ltd.
Krefelder Str. 677
D-41066 Mönchengladbach
Tel.: +49 (0) 2161 69497-60
Fax: +49 (0) 2161 69497-61
E-Mail: info@otc-daihen.de
Internet*: www.otc-daihen.de
Managing Director: Fumiyoshi Kawahara

Register court: District Court Mönchengladbach HRB 4216

Tax number: 121/5752/4392

ID number: DE 120 493 204
WEEE-Reg.-Nr.: DE 186 043 20

Repsonsible body in respect of content according to § MDStV: Norbert Kleinendonk
*Iiability notice: Despite careful checks as regards content, we assume no liability for the content of external links. The operators are exclusively responsible for the content of such linked sites.

For questions about our products and services please use our Hotline: +49 (0) 2161 69497-0

Notice of liability:
All the links personally placed on the OTC DAIHEN EUROPE Ltd. website by OTC DAIHEN EUROPE Ltd. are to be counted as a recommendation, that it may be the case that OTC DAIHEN EUROPE Ltd. accordingly annotated the link In a different way. OTC DAIHEN EUROPE Ltd. links pages in order to offer visitors and members continuous information about certain themes or to provide them with access to recommended articles.
It may happen that the referenced contents change without the knowledge of OTC DAIHEN EUROPE Ltd. In the website credits of the Berlin Commissaries for Data Protection and Access Records at http://www.datenschutz-berlin.de/ueber/impress.htm#links it is stated, that OTC DAIHEN EUROPE Ltd. only has to vouch for foreign content when it has positive knowledge of it (by this also implied illegal or criminal content) and it is technically possible and reasonable for OTC DAIHEN EUROPE Ltd. to prevent its use. However, it is not reasonable for OTC DAIHEN EUROPE Ltd. to constantly verify all links on the OTC DAIHEN EUROPE Ltd. website, as to whether they are still in the state in which they were when they were linked.

For questions relating to the website please turn to the Webmaster.

Other legal notices:
Data protection information
General conditions of use
AGB

Web design, conception, establishment of the CMS and editorial support:
AdService Werbeagentur GmbH
An der Wolfskaul 42a
41812 Erkelenz
Tel.: +49 (0) 2432 890 88 90
info@adservice-web.de