Power source for welding thin steel sheets

Bild DW300+

New AC / MIG power source DW300 + at the start!

The new pulse inverter
power source
DW300 + now will replace the DW300 welding power source, which already was used successfully for years for thin sheet metal in aluminum. Like its predecessor, the new DW300 + represents  the well known AC / MIG technology, a method developed by OTC, which is classified as particularly gentle for the material. In addition to thin aluminum sheets the DW300 + can be used with even thin steel sheets.


>> Let us inform you personally

World first: robot controller controls wire drive

 

 

 

 

With the AC servo torch system OTC provides a wire in the torch, which can be directly controlled by the robot controller. The AC servo torch is virtually synonymous with an autonomous robot axis, and has response times in milliseconds. The AC servo torch can be used with any OTC inverter welding machine. The system is specifically tailored to the D-series of OTC power sources. By the way the new burner system will particularly benefit in the thin sheet metal aluminum and steel sector.

 

>> more about the AC servo torch

Expanded range of Servo Motors

HWP.jpgPowerful servomotors accompany new A2 Robot Series

In order to fit a 6 - or 10-ton-positioner of OTC and manage fast enough, OTC now has a servo motor series of 7 kW. With the replacement of the AX series and the introduction of the new robot series A2 to the engine power was increased by 2.5 KW. As a result, higher speeds, with much higher loads can be achieved. As a result, higher speeds, with much higher loads can be achieved.
>> You like to know more about the servomotores of OTC? Ask us.... 

Precision and expedience get to the heart of the result

It is generally known that up to 40 % of time is saved during welding processes, if a positioner that is more precise and quick to react, assumes control of the workpiece. However, in doing so, it shows that heavy loads or high demands for variable table sizes or smaller angles are an important subject and that many manufacturers already have to "adapt" because of this. Performance-oriented OTC positioner systems are exactly the right choice for you in terms of genuinely fascinating moments in welding technology. Ask us so that we can help explain the solution that is most suited to your needs.

2 Stations-positioner


Pulse tables/Horizontal opener/Vertical opener/Double rotational tables

Anything other than free of tact: Decide on an indexing table as a tact positioner for one or more stations To the 2 stations-positioners…




Individual positioner

Rotational positioner - Rotational breakover-positioner

Everything revolves around the correct axis: Select horizontal axes for positioning the component during welding. The rotary axis is used as a robot axis for OTC systems. To the head stock positioners



Rotary and tilting during a cycle: During welding, complex contours or workpieces can be brought due to OTC-rotary-tilt positioners into the 100 % correct position. The rotary and tilting axis is used as a robot axis for OTC systems. To the double support positioners

Slider


Sliders for transverse paths up to 25 m


OTC stores various slider models for you. All sliders can be used with complete synchronisation as well as independently by the robots. To two selected sliders…